304 Stainless Steel RS485 Speed Gate Turnstile Visit Management System
304 Stainless Steel RS485 Speed Gate Turnstile Visit Management System
Automatic High Level Automatic Fast Speed Lane Turnstile Speed Barrier Gate For Hotel/Business Hall/Commercial
Banks and insurance companies ,airports
Government buildings and instituations
Office buildings,head offices,administrative sites
Schools ,universities and colleges
Hi-Speed Swing Gate is built with high torquebrushless motor; with the advantage of low current consumption and low maintenance.
Speed of the motor (barrier) is easily adjusted with the purpose-build main board.
Stainless steel cladding with aluminium end cover. The end cover with Status Indication, is desgined to
accomodate various type of reading and scanner device.
The length of the pedestal can be lengthened to suit customer request and site profile.
The top cladding can be raised and modified to accept embedded lift display screen, face scanner post, etc.
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode or free mode.
(2). NO mode & NC mode can be switched over by users easily & freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and personal injury.
(7). Emergency-escape function: the gates will open automatically by pressing the emergency button which can be remote-controlled whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms, driving current ≥ 10mA), compatible with all kinds of access controllers.
(9). Equipped with free control software for machine interface & control command SDK.
Standard Features & Functions
||Smooth operating motorized barriers, the entire system runs smoothly, with a small noise and free of mechanical impact.
||Extremely fast throughputs.
||The fastlane turnstile system can easily integrates with the 3rd party equipment, such as Biometric systems, consumption systems, ESD system and access control system, etc.
||Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by switch-button or access controller.
||Automatic check fault and alarm prompt function: to convenient for users to maintain.
||The running status of device can be set up through pressing the built-in small keyboard of the main control board.
||The device is locked until a valid open signal is received.
||Emergency-escape function: When power off, it will be opened the gates automatically to meet the request of fire protection. Also the gates will open by pressing the emergency button which can be remote-controlled whether the power is on or not. (Optional).
||Remote control and management function: Through the management computer to realize remote control and management.
||Streamline small footprint design that utilizes shared cabinets for multi-lane
||LED indicator function: Traffic lights on both sides of the turnstile barrier are the indicator of access status, When the traffic lights show green, it means to pass and the red light means no-entry. The traffic lights on both sides can be set to indicate access for left or right or bi-direction.
||Anti-pinch function: Auto-alarm will activate for unauthorized pedestrian movement and tailgating. The barrier uses several photo sensors to prevent turnstile closure on a person while inside the lane.
||Reset automatically function: ① the gates can locked automatically when it be forcibly pushed 10 degrees. ② “Go” signal will be cancelled if passage through is not completed within pre-set time. The standard default is 10 seconds (time adjustable 1s ~ 60s, by changing parameter of main control board).
||304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional)
|Thickness of ply
||brushed surface, polishing surface
|Shell's size (L*W*H)
|Swing arm material
||Tempered glass or Acrylic (optional)
|Stretching out swing length
|The inductive card reader dimension
||equipped with the standard mounting brackets or tailor.
||Germany technological motor
||DC36 servo motor
|Passing speed in normally open mode
|Passing speed in normally closed mode
|Swing arm transmission angle
||unidirectional or bi-directional
|Opening / closing time
|The time required to running state after power on
|Automatic reset time after the failure
|Mean time to failure
||min. 10 000 000
||-10℃ ~ +70℃
||less than 95% not condensed
||Indoor/Outdoor (with rain-tent cover)
||relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal
RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet
1. Self-test and alarm function,user-friendly maintenance and use ;With automatic reset function,gate opening after a specified period of time. If user does not pass,the system will automatically cancel the user's current access permission; Auto-reset delay, the standard automatic reset is after 10 seconds.
2. Through the main control on the half-built small-press plate,Programmable devices show running status.
3. When valid card is read and passenger passed,arm can be delayed to close from 1-10s which can be set on the control panel.
4. One-directional,bi-directional function.
5. Auto-reposition function:After card is read,if passenger does not pass within regulated time period,swing gate will cancel this passing permission,The regulated time period for passing can be set by management.
6. If passenger passes without card being read or valid card read,Swing barrier will alarm until passenger gets back from the swing barrier and then uses a valid card to be read for passing.
7. Erosion control features,in the absence of gate opening signal receipt,the arm will automatically be locked.
8. Anti-rush function:if there is no open signal arm will hold tightly.
9. Adjustable arm swing synchronized (for the double pendulum case).
10. Adjustable normally open or closed, in order to meet the requirements of the different venues.
11. Connecting with a variety of reading devices which can be linked to the receiving signal relay switch.
12. Swing gate is with RS485 interface for long-distance control concern and the integration of various readers and writers. Managing computer directly through the remote control and management .
13. Auto power-off flap opening,power-on self-closing,Meets fire safety requirements.
14. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the swing barrier,photocell will detect this situation and will not close. After passenger has passed,arm will close automatically. During its reposition,if arm meets any obstacle,arm will get back automatically or stop working for a while with very slight force. Also it will alarm.
15. Direction display to guide passenger which direction to go.
16. Card-reading with memory or without memory function.
17. Swing barrier can control the population inside in the control of software.
18. Stable running with little noise.