35 Persons / Min Brushed Speed Gate Turnstile With Face Reader
DC Brushless Motor Barrier Swing Gate Automatic Pedestrian Swing Barrier Turnstile With Face Reader
This is the minimum optical swing barrier gate, single working, lower air freight cost for sample order,
with LED indicator for access, and optical swing can be extended according to project requirement.
Advantage of swing gate is the channel width can be extend easily, support motor bike bicycle and wheelchair pass.
This swing barrier is the intelligent access management produced by our company, this equipment organically
integrate machinery electronics microprocessor control,and all kinds of different reading and writing equipment.
Through figuring all kinds of different reading and writing equipment,and adopting reliable performance safety
protection devices real-time alarm system, and direction indicator interface, realizing the access intelligent control
and management by the mutual coordination.
Main function and features
1. The stylish stainless steel column and clear toughened glass wing present a bright and concise design.
2. Bi-directional opening facilitates fast and safe access. It can also be integrated with recognition systems
for user friendly access control.
3. Featured with high security and stability, it’s suitable for banks, corporate headquarters, airports and leisure
4. Fault detection and alarm functions, easy to use and maintenance.
5. The running status can be programmed and controlled with the built-in keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset).
7.Anti-breakthrough function. The gate is locked automatically until opening signal received.
8. Synchronization functions (for dual gate equipment).
9.Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Via dry contact signal)
12. Direction can be set as unidirectional or bidirectional.
13. The device can be connected to management computer to realize remote control and management.
14. LED direction indicator (optional)
15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
16. Support infrared photocell for anti-pinch and reset function.
||304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional)
|Thickness of ply
||brushed surface, polishing surface
|Shell's size (L*W*H)
|Swing arm material
||Tempered glass or Acrylic (optional)
|Stretching out swing length
|The inductive card reader dimension
||equipped with the standard mounting brackets or tailor.
||Germany technological motor
||DC36 servo motor
|Passing speed in normally open mode
|Passing speed in normally closed mode
|Swing arm transmission angle
||unidirectional or bi-directional
|Opening / closing time
|The time required to running state after power on
|Automatic reset time after the failure
|Mean time to failure
||min. 10 000 000
||-10℃ ~ +70℃
||less than 95% not condensed
||Indoor/Outdoor (with rain-tent cover)
||relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal
RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet