Biometric Sensors Rfid Card System Speed Gate Turnstile Facial Recognition
Biometric Sensors Rfid Card System Burshless Motor Speed Swing Turnstile Gate Access Control Facial Recognition
Intelligent high speed gate ---can be compatible with IC card, ID card, barcode card, fingerprint reading card
recognition device used for staff, provide civilized, orderly access methods; effectively manage the access of
staff. Can be widely used in the station, wharf subway, factories, office building, hotel, clubs, intelligent
community, enterprises and institution that need intelligent access management.
MAIN FUNCTION AND FEATURES
1. The device adopts DC brush-less motor, which supports at least 5 million normal passages.
2. The device adopts multiple pairs of infrared detection sensors, and adopts anti-tailing tracking control technology,
which can be passed by authorized personnel. When unauthorized personnel enter, an audible and visual alarm will
3. The device integrates a voice module which can customize the voice broadcast content according to user
4. The device uses LED to indicate the traffic direction and display the traffic status.
5. The device has anti-shock function. When there is intrusion, the door wing is automatically locked.
6. The equipment has self-test, self-diagnosis, automatic alarm function, sound and light alarm function including
illegal intrusion alarm, reverse intrusion alarm, trailing alarm etc.
7. The device has an automatic reset function. When the gate does not pass within the specified time after opening
the door, the system will automatically cancel the user's permission for the current pass and set the transit time.
8. The device supports flexible configuration of the access status (controlled, free traffic, no traffic) in the inbound
and outbound directions.
9. The device supports the memory mode which enables continuous and fast traffic.
||304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional)
|Thickness of ply
||brushed surface, polishing surface
|Shell's size (L*W*H)
|Swing arm material
||Tempered glass or Acrylic (optional)
|Stretching out swing length
|The inductive card reader dimension
||equipped with the standard mounting brackets or tailor.
||Germany technological motor
||DC36 servo motor
|Passing speed in normally open mode
|Passing speed in normally closed mode
|Swing arm transmission angle
||unidirectional or bi-directional
|Opening / closing time
|The time required to running state after power on
|Automatic reset time after the failure
|Mean time to failure
||min. 10 000 000
||-10℃ ~ +70℃
||less than 95% not condensed
||Indoor/Outdoor (with rain-tent cover)
||relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal
RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet
1. Self-test and alarm function,user-friendly maintenance and use ;With automatic reset function,gate opening after a specified period of time. If user does not pass,the system will automatically cancel the user's current access permission; Auto-reset delay, the standard automatic reset is after 10 seconds.
2. Through the main control on the half-built small-press plate,Programmable devices show running status.
3. When valid card is read and passenger passed,arm can be delayed to close from 1-10s which can be set on the control panel.
4. One-directional,bi-directional function.
5. Auto-reposition function:After card is read,if passenger does not pass within regulated time period,swing gate will cancel this passing permission,The regulated time period for passing can be set by management.
6. If passenger passes without card being read or valid card read,Swing barrier will alarm until passenger gets back from the swing barrier and then uses a valid card to be read for passing.
7. Erosion control features,in the absence of gate opening signal receipt,the arm will automatically be locked.
8. Anti-rush function:if there is no open signal arm will hold tightly.
9. Adjustable arm swing synchronized (for the double pendulum case).
10. Adjustable normally open or closed, in order to meet the requirements of the different venues.
11. Connecting with a variety of reading devices which can be linked to the receiving signal relay switch.
12. Swing gate is with RS485 interface for long-distance control concern and the integration of various readers and writers. Managing computer directly through the remote control and management .
13. Auto power-off flap opening,power-on self-closing,Meets fire safety requirements.
14. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the swing barrier,photocell will detect this situation and will not close. After passenger has passed,arm will close automatically. During its reposition,if arm meets any obstacle,arm will get back automatically or stop working for a while with very slight force. Also it will alarm.
15. Direction display to guide passenger which direction to go.
16. Card-reading with memory or without memory function.
17. Swing barrier can control the population inside in the control of software.
18. Stable running with little noise.